OPERATION
7. To reengage the transmission, rotate the
bypass levers to the vertical position.
Load the machine into truck or trailer by driving up
ramps in low gear. DO NOT LIFT! The machine is
not intended to be lifted by hand.
WARNING! Once the bypasses are
engaged, and the steering controls are moved
in to release the parking brake, the unit is free
to roll and potentially injure someone.
WARNING! Use more care when loading
the machine into a truck or trailer using ramps.
There is the possibility of dangerous injury or
death if the machine falls off the ramps.
WARNING! Do not make adjustments
unless:
• the engine is stopped,
• the ignition key is removed,
• the park brake is engaged
20