Lemeks EL12-1817-1 Manual De Montaje página 16

Installation manual
4. The door assembly
First, screw the door panels with 3 * 30 mm screws to the door (Pos.15), leaving a space
for the bolt in the center. Then mount the hinges with 3.5 * 30 mm screws (approximately
20 cm from the upper edge and the lower edge of the door) on top of the door frame.
20 cm
1. The assembly of the door hinges
Attach the doors to the front wall element with 3.5 * 30 mm screws. Leave a space of
approximately 3 mm between the doors and the wall element.
Fasten the bolt latches with 2.5 * 12 mm screws as shown in the photos.
Mount the bolt with 3.5 * 30 mm screws after placing the detail pos.20.
2. The mounting of the latches
5. The wall boards
Place the corner, rear wall and side wall boards (Pos. 11 and 12) and secure them with
3.5 * 30 mm screws.
Finally, fasten the diamonds (Pos. 18) with 4.5 * 50 mm screws.