Descargar Imprimir esta página

Sound-X SMI-1410 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Play the Keyboard
[1] To turn on the keyboard, set the POWER to ON. The display will illuminate.
Note:
To save power while unit is not in use, it will notify you with bell sound every 5 minutes.
[2]
Adjust the volume to the desired level. Repeatedly press volume up or volume down to
increase or decrease the volume. The keyboard's volume ranges from 0 (no sound) to 10
(maximum), and the current volume level appears on the display.
Playing the Demo Song
You can listen to any of the 50 songs listed on the right side of the panel.
[1]
Press
SONG
. The display appears SONG along with the number of the current song.
Note:
The keyboard pre-selects the tune "Canon" (No. 01) each time the powered ON.
[2]
Choose a song from the SONGS list and enter its two-digit number on the keypad, or,
press " " " " to move to the lower or higher numbered song.
-
+
[3]
Press
START/STOP
A "score" to display the notes that are playing is located in the center of the display.
A "keyboard" is displayed fingering and which keys are pressed (bottom of the display)
The black dots next to the song number display the beat count in the measure.
The musical chord is displayed at the left corner of the display.
[4]
To change the tempo, repeatedly press
tempo setting appears.
[5]
To select a different song, repeat step 2. To stop, press
Using Demo
To play a demo song one by one (in order from the selected starting point), press
DEMO
. To stop the demo, press
All manuals and user guides at all-guides.com
to start playing the song.
TEMPO UP
DEMO
again.
E06
or
TEMPO DOWN
. The current
START/STOP
.

Publicidad

loading