Leotec LEMP3FM01 Manual De Usuario página 10

Faults
No power and No
display
FM radio refuses to
work
FM noise after power
on
Figure 2
Troubleshooting
3. Check whether the fuse tube is disconnected,
the tube should be replaced (
4. Check whether the voltage is 12V.
Check whether the frequency of radio is
consistent with the player
5. Check whether the frequency of radio is
consistent with the palyer
6. Select the station-free frequency
7. The song has fault, please select another song
to play
8. It may eliminate the noise by increasing the
volume, if the sound is distorted, please turn
down the volume
Solutions
).
Figure 2