Descargar Imprimir esta página

Thulos TH-BR10 Manual De Instrucciones página 11

Brasero 900w

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS.
1. Make sure that the brazier switches are in the off position.
2. Plug in the brazier to the electric current.
3. Switch on the heater with the switches of operation.
4. You can turn on only one resistor or both resistors at the same time.
5. Only the internal resistance on has a power of 400W.
6. Only the external resistance on has a power of 500W.
7. The two resistors lit reaches a power of 900W.
8. To turn off the brazier, turn off the switches and then unplug of the electric current.
9. Avoid unplugging the electric current without first turning off the switches.
IMPORTANT SECURITY INSTRUCTIONS.
- Never leave the heater unattended while it is plugged in and switched on.
- While it is in operation, never cover it. It can cause fires.
- Always unplug the power when it is not in use.
- If you leave the heater for a moment do not leave it on, turn it off.
CLEANING AND MAINTENANCE.
- The heater must be unplugged from the electrical power and cool before proceeding
to its cleaning.
- Clean the device with a slightly moistened cloth.
- Never use abrasive or flammable products to clean the appliance.
- Never immerse the heater in water.
- Clean the grids with a duster, brush or vacuum cleaner.
- If you are not going to use your heater for a long period of time,
store it in a cool, dry place where it does not pick up dirt or dust.
SPECIFICATIONS.
- Input Power: 220V- 230V / 50 Hz.
- 3 Heating powers: 400W / 500W / 900W.

Publicidad

loading