Publicidad
Idiomas disponibles
Idiomas disponibles
Untitled-3 37
5. Remove the two screws that are above
and below the cut-out in the frame
front.
6. Remove the two screws above and
below the lever holder on the opposite
side of the door opening.
7. Remove the two screws that hold the
lever holder in place, and then remove
the lever holder.
8. Re-insert the two screws that held the
lever holder into the same screw holes,
and then tighten.
English 37
2020-06-26
2:42:34
Publicidad
