Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
01 Cycle Selector
02 Digital Graphic
Display
03 Dryness
04 Temp.
05 Time
06 Wrinkle Prevent
44
English
Untitled-2 44
Turn the Cycle Selector to select the desired cycle. The indicator
by the cycle name lights up.
• Steam Cycles: The dryer sprays water into the drum to
deodorize clothes and reduce static electricity and wrinkles.
• Manual Dry: The drying time is fixed.
Displays all cycle information, including the cycle time,
information code, and operating status.
Press to select a dry level. You can select from 5
different options (Less to More). Please refer to following
recommendations to select the appropriate dryness.
• For larger or bulkier loads, select More for complete dryness.
• For items that needs to lay flat or hang to dry, use Less to
partially dry items.
NOTE
This option is not available with REFRESH, STEAM SANITIZE ,
ACTIVEWEAR, TIME DRY, QUICK DRY, and AIR FLUFF.
Temperature can only be adjusted in TIME DRY cycle.
Press to change the temperature of the current cycle. You can
select from 5 different options (Low to High). Please select the
appropriate temperature depending on the items in the load.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Low: For heat sensitive items labeled Tumble Dry Low
or Tumble Dry Warm. Provides the lowest heated drying
temperature possible.
Press Time to select a drying time for the selected cycle. This
is available only with TIME DRY, QUICK DRY, and AIR FLUFF.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
2020-06-30
12:14:43
Publicidad
