Down Button - tti Tech PMR-122TX Manual De Instrucciones

Push To talk(PTT)Button
Pressing and holding this button will allow you to speak to any
transceiver that is set to the same channel and privacy code
setting as yours. Hold the transceiver approximately 2 to 3
inches from your mouth as you speak into the built in
microphone. After you have finished speaking, release the PTT
Button to allow reception of incoming signals. Whenever the
button is pressed, the transmit icon (
receiving an incoming signal, the busy (
The PTT button can also be used as a two-way call ringer.
Pressing the button twice quickly will call another party on the
same channel.
Up Button
In the standby mode, pressing this button will increase the
listening volume. The current volume is indicated (1-7). When in
function edit mode this button will be used to adjust the unit's
settings.

Down Button

In the standby mode, pressing this button will decrease the
listening volume. When in function edit mode this button will be
used to adjust the unit's settings.
Operating Modes and Features
PMR Operation
- Press and hold the POWER On/Off button for 2 seconds to
turn on power.
- Press the MODE button so the channel number flashes.
- Select the desired channel with the Up and Down Buttons.
The BUSY icon appears to indicate an incoming call.
- Press and hold the PTT button to transmit,then speak into the
microphone clearly and slowly. The transmit icon ( ) appears
on the display while the button is pressed.
- Release PTT button to receive.
- Communication can only be accomplished when the channel
and CTCSS tone frequency of at least two parties are the
same.
) will appear. When
) icon will appear.
5