DURAVIT Ketho KT 7330 Instrucciones De Montaje Y Uso página 6

1
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
> Plug the mirror into the
outlet.
> Line up the mounting
hooks with the inserts on
the back of the mirror.
> Push mirror onto wall
until hooks are inserted
securely.
2
Ø ⅜"
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Lay the bottom of the
mirror against the wall.
> Tighten the set screw to
secure the mirror in place.
LED
1-2 sec 100%
3
2x
3x
> The plastic anchors
provided are for concrete
wall applications.
7
> Use adjustment tool to
move mirror up and down
for leveling.
4
1x
2x
> Thread the two mounting
screws into top two
anchors.
> Leave the hooks facing up.
> Secure the L-bracket to
wall with set screw on the
bottom.
LED
>3 sec 100% 10%
MAL_Ketho_KT7330/17.11.1
6