Publicidad
Idiomas disponibles
Idiomas disponibles
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
The device must be checked for damage and integrity upon receipt of the package. In the event of
identification of damage due to transport, refuse or accept the delivered product only with reservations *. A
complaint detailing the defects observed must then be made. The perception of damage is only possible in
the event of a complaint formulated within the prescribed time limits, ie 24-48 hours maximum.
* written on the carrier's delivery papers or digital.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to after-sales service. The inner
and outer packaging must be completely removed before using the device. The standards in force in your
country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
Operating
temperature
Electrical data
Dimensions
Weight
Removable GN 1/1
container - 100mm
deep
5. INSTALLATION AND USE
CTC1
40 ° C to 80 ° C
750 W / 230 V
W 467 x D 662 x H 350 mm
26.45 Kg
1
CTC2
40 ° C to 80 ° C
1,500 W / 230 V
W 467 x D 662 x H 450 mm W 467 x D 662 x H 595 mm
47 Kg
2
EN
CTC3
40 ° C to 80 ° C
2200 W / 230 V
62 Kg
3
Publicidad
