Publicidad
Idiomas disponibles
Idiomas disponibles
Smart Care (DVE50T7350* models
only)
If the dryer displays an information
code, you can use Smart Care to check
the status of the dryer on a smartphone.
To use Smart Care, you must have the
Samsung Smart Care app installed on your
smartphone.
NOTE
Smart Care is optimized for Samsung
Galaxy and Apple iPhones. (Not compatible
with some models).
Download the Samsung Smart Care app
from the Google Play Store or Apple App
store (Search word: "Samsung Smart
Washer/Dryer"), and install it on your
smartphone.
If an information code appears on the
dryer, follow these steps:
1. Press and hold Wrinkle Prevent for
3 seconds to activate Smart Care. The
Smart Care indicator turns on.
2. Open the Smart Care app on your
smartphone.
3. Put the smartphone's camera close
to the display of the dryer. The
app automatically recognizes the
information code, and displays
suggestions on your smartphone.
4. If the smartphone fails to recognize the
information code more than twice, type
the information code manually into the
Smart Care app.
CAUTION
• If light is reflected on the display of
the dryer, the smartphone may not
recognize the information code.
DV7350N_DC68-03784L-00_EN.indd 41
• If you hold the smartphone at an angle
to the dryer's display, the dryer may
not recognize the information code.
For best results, hold the smartphone
so that the front of the panel and the
smartphone are parallel or nearly
parallel.
• After you use this function, the dryer
will delete delete the record of the
information code from its code log.
English 41
2019-12-06
12:10:44
Publicidad
