IB Connect BOX Manual De Usuario página 7

User Manual
05
+0,2
1
-0
06
07
BOX PLUS COVER LAYER: To cover the Box
Plus cover with a finish that matches the desk
(wood or another material), cut a layer with the
+0
282
same dimensions shown in figure 5.
-0,2
+0
101
-0,2
IMPORTANT: If necessary, respect the position
and direction of the wood grain.
Contact adhesive is recommended for securing
the material to the cover (in the case of wood or
another porous material). For materials such
as leather or synthetic leather , do not use
adhesives containing cyanoacrylate.
Adhesive not supplied with the product.
Insert a flat-head screwdriver into the holes in
the rail tabs, levering,alwaystowardsthe outside
of the box.
IMPORTANT:Both tabs must be unlatched
before the rail is pulled out.
For any questions on the profile frame, contact
us at:
oficinatecnica@ib-connect.com
05-06
EN