cecotec CECOMIXER EASY Manual De Instrucciones página 18

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Body
2. Tilt support pusher
3. Tilt support
4. Pusher to release whisks
5. Speed knob
6. Whisks holes
7. Mixing whisks
8. Kneading whisks
9. Bowl
10. Swivel base
11. Bowl slide knob
2. BEFORE USE
Take the product out of the box and remove all packaging materials.
Make sure all parts and components are included and in good conditions. If any sign of visible
damage is observed, contact immediately with our official Technical Support Service.
3. OPERATION
1. Keep pressed the tilt support pusher (2) and lift up the support (3) (Fig. A).
2. To place the bowl (9) in the swivel base (10) keep pressed the swivel base and turn the
bowl to the indicated direction.
3. Place the whisks into the holes.
Note
The whisks that have a ring in the edge must be placed in the hole with bigger diameter of the
blender showed with the letter "R". If it is not like this, there is risk of dough spill.
Mixing whisks (7)
For liquid mixes, creams, egg whites, etc.
Kneading whisks (8)
Designed to knead pastry and light dough.
CECOMIXER EASY
18