Publicidad
Idiomas disponibles
Idiomas disponibles
3. HANDLING AND INSTALLATION PROCEDURES
This installation document relates to the following types of tanks and specific uses:
Type of tank:
FEKAFOS MAXI 1100-2780
Tank type used:
• Always full
• Full and empty
• Lifting
• Above ground
3.1
PRELIMINARY OPERATIONS
ENGLISH
LEGAL OBLIGATIONS
Throughout all operations, compliance with Italian Legislative Decree 81/2008 and subsequent
amendments and additions on the safety of temporary and mobile worksites is compulsory. Before
installation, inspect the tank carefully for damage.
HANDLING AND USE
Sling the tank with ropes of suitable load capacity, or use the eye-bolts provided for lifting. The
lifting and handling equipment used must have suitable load capacity and must meet the current
legal requirements. Do not install the tank close to heat sources. During handling, place suitable
warning signs around the operating area.
LOADING AND UNLOADING
Loading and unloading must be carried out with care: tanks must not be dropped or slid along the
sides of the truck during loading and unloading but must be lifted and deposited with great care.
Do not stack tanks during storage as this may damage them.
22
Publicidad
