Philips HR1943 Manual Del Usuario página 8

ENGLISH
10
4 Put the pieces of fruit or vegetables in the feeding tube and gently press them
down towards the juicing screw with the pusher (Fig. 14).
Never insert your fingers or an object into the feeding tube or juicing unit.
5 When the juice flow has stopped, switch off the appliance and wait until the
juicing screw has stopped rotating.
6 Press the pre-clean button to remove the last drops of juice from the juicing
unit (Fig. 15).
7 To prevent juice from dripping onto the table, press the drip stop (Fig. 16).
Tips
Use fresh fruit and vegetables, as they contain more juice. Pineapples, beetroots,
-
celery stalks, apples, cucumbers, carrots, spinach, melons, tomatoes,
pomegranates and grapes are particularly suitable for processing in the juicer.
You do not have to remove thin peels or skins. Only remove peels which you
-
would not eat, e.g. those of oranges, pineapples, kiwis, melons and uncooked
beetroots.
If you want to juice fruits with stones, such as peaches, plums or cherries,
-
remove the stones before juicing.
When you prepare apple juice, remember that the thickness of the apple juice
-
depends on the kind of apple you use. The juicier the apple, the thinner the
juice. Choose a kind of apple that produces the type of juice you prefer.
Apple juice turns brown very quickly. To slow down this process, add a few drops
-
of lemon juice.
This juicer can handle starchy fruits such as bananas and mangoes. You can add
-
milk or water directly through the feeding tube.
Citrus fruits can also be processed with the juicer, remove the white pith of citrus
-
fruits because it has a bitter taste.
Cleaning (Fig. 17)
The appliance is easier to clean if you do so immediately after use. Look at the
-
cleaning table to see how all parts can be cleaned.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as
alcohol, petrol or acetone to clean the appliance.
Note: All detachable parts are dishwasher-safe and can be safely cleaned under
the tap.
1 Switch off the appliance and remove the plug from the wall socket.
2 Open the locking clamp (Fig. 18).
3 Slide the juicing unit off the motor unit (Fig. 19).
4 Remove the pulp container from the motor unit (Fig. 20).
5 Empty the pulp container and rinse it under the tap.
Disassembling and cleaning the juicing unit
1 Remove the pusher from the feeding tube (Fig. 21).
2 Remove the berry tray from the feeding tube (Fig. 22).
3 Turn the juice collector anticlockwise until the arrow (
indication and remove it from the juicing unit. (Fig. 23)
) points to the 'open'