ACDelco ARI20155 Manual Información Del Producto página 10

2. Take the bit out from the hexagonal hole.
3. By releasing the guide sleeve it will return to its original position.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil. (see Fig. 4)
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket. Pull out the socket from the
anvil directly. (see Fig. 4)
CAUTION
BATTERY POWER INDICATOR
Trigger the tool and Battery Indicator to show the
battery pack's remaining capacity
1. One light ON: 30% remaining capacity.
2. Two lights ON: 60% remaining capacity.
3. All lights ON: 100% remaining capacity.
1English1
A
Fig. 3
Fig. 4
Always set switch (5) to off position when installing and
removing socket.
English -9