Publicidad
Idiomas disponibles
Idiomas disponibles
3.4 Installing the PSU
1.
Insert PSU module into the bay.
2.
The lock will flip to the right automatically when the PSU is seated.
3.5 Removing the HDD tray
1.
Unlock the tray by moving the lock to the left.
2.
Push the tray's button to open the tray handle.
3.
Grab the tray handle and pull it evenly towards you.
3.6 Installing the HDD
1.
Insert the tray into the bay.
2.
Close the tray handle.
3.
Lock the tray by moving the lock to the right.
Drawings and specifications herein are property of the Company and shall not be reproduced or copied or used without prior written permission.
22
25
Page
of
Publicidad
