Descargar Imprimir esta página

Orbegozo HO 236 Manual De Instrucciones página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

HO 236
M: Bake Tray
N: Wire Rack
OPERATION
The oven can be regulated by means of the following elements:
-Thermostat regulates the temperature of the oven; turn the knob to the desired temperature: the
heating element switches on, then off as soon as the temperature is reached.
Switch. Selects the cooking mode; switches the upper and lower heating element on and off.
Settings:
= Off.
= upper heating element: heats the upper part of the oven in particular
= upper and lower heating element: heats uniformly
= lower heating element: heats the lower part of the oven in particular
- Timer. Regulates oven functions; turn the timer knob to the desired cooking time, after which the
heating elements will switch off. The knob will turn gradually towards the "0" position, and when it
reaches "0", a buzzer sounds.
The oven is provided also with the following accessories and elements:
- Wire rack that can be placed in one of the slots provided
- Bake tray that can be placed in one of the slots provided
- Crumb tray that can be placed at the bottom to distribute lower heat uniformly
- Pilot light: on when resistances are working
WHEN USING FOR THE FIRST TIME
Before being used for cooking, the appliance should be switched on "empty" to eliminate the "smell
of new" and any oils remaining from the production process. Insert the plug in the power socket,
turn
thermostat to "max", turn the timer knob to position "20", position the selector
leave the appliance on. When the cycle ends, remove the plug from the socket and wait until the
appliance is cool before removing the accessories. These must be washed in hot water with normal
dishwashing liquid, rinsed and dried before being returned to their position.
O: Glass Door
knob and
18

Publicidad

loading