Orbegozo HO 210 Manual De Instrucciones página 18

HO 210
- Turn the timer knob to the time required: the pilot light and the oven starts to heat: if cooking time
is not sufficient, restart the timer for the time still required.
When cooking is completed, turn the selector switch to
the plug from the power socket.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch it off, remove the plug from the outlet and wait for
it to cool.
• To clean the outer surface always uses a soft cloth slightly damp with water only. For oven cleaning
(shelf grids and enameled baking tray), use a slightly moist soft cloth; do not use metal pads or
abrasive products. Do not wash it under running water, submerge it in water, or place it in a
dishwasher. Before using the appliance, make sure that it is perfectly dry, especially the contacts.
• Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
• To replace the electrical cord a special tool is required: contact an authorized assistance centre for
eventual repairs.
• If you decide to stop using the utensil, we recommend making it inoperative by cutting off the
power supply cord (after first making sure that the plug is removed from the mains socket) and
render harmless any parts possibly used as toys.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separately
collected. Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.
; the thermostat to "0" and remove
18