Publicidad
Idiomas disponibles
Idiomas disponibles
MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
CODIGO 80435 REV 0
If you still cannot use the equipment correctly, contact the technical service
or the manufacturer.
4. Simple troubleshooting:
No.
1
No power supply
2
Engine does not
turn
3
Poor sealing
9. Maintenance and warranty
9.1 Secure review method
Turn off the power supply, and unplug the power cord. Use the appropriate
screwdriver, remove the bracket, check for damage and replace it. Then replace
the fuse holder.
Warning:
● Do not disassemble the device if you are not a professional.
● Do not hit or pull on it.
● Contact technical support.
● Damage caused by the customer is not the responsibility of the after-sales
service.
9.2 Warranty
This product is guaranteed for one year from the date of purchase. The warranty
does not cover damages caused by an improper use or causes beyond the control
of the manufacturer.
Any manipulation of the equipment by unauthorized personnel cancels the benefits
of the guarantee.
The customer will pay the repair charges in the following cases:
1) In case of excess of the guarantee period of the product, after one year from
the date of the purchase invoice.
2) During the warranty period, if one of the following reasons occurs:
a) External force factors that cause damage and deformation of the device.
b) Accumulation of dust, corrosion, mold, biological damage and liquid moisture
inside the used equipment, or that it is stored in a bad environment;
c) Machine parts melted or seized due to improper use;
d) Whether it has been used to seal polyethylene film, soft PVC film, hard PVC
film, nylon film, polypropylene film. Neither of these materials can be sealed.
e) Use of an unreliable grounded power supply.
f) The mains voltage is beyond the specified range of the equipment.
g) Due to unavoidable natural disasters;
h) The replacement of non-original parts produced by the manufacturer.
i) Unauthorized personnel for disassembly, modification and maintenance of the
equipment.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Failure
Analysis
Is the equipment
plugged in or open?
Is there a paper jam?
Adjust temperature
06/2022
Pag.: 11
Solution
Connect it to the
electric current
Do not feed cards
Repair or replace
Tel 34 937 700 877 Fax 34 937 702 362
Publicidad
