Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
INSTALLING THE FAUCET
- Connect the spray head to the faucet neck
- Remove the gasket, metal washer, and retaining nut from
the faucet .
- Insert the faucet through the hole in the sink .
- From underneath, secure the faucet to the sink with the
gasket, metal washer, and retaining nut .
- Tighten the retaining nut by hand until it is snug . Use a
wrench to tighten it down . Gently tighten the two screws
on the retaining nut . Do not over tighten .
- Connect the water supply lines (not supplied) to the water
inlets using two wrenches . Failing to use two wrenches
can damage the faucet . Do not overtighten .
Spray
head
Faucet body
Gasket
Retaining nut
Water inlets
7
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
Faucet
neck
Sink
Metal washer
Screws
CONGLOMKB .COM
Publicidad
