Publicidad
Idiomas disponibles
Idiomas disponibles
Avanti AT
Adjustment of idler pulley
1) Loose 4 pieces fastening bolt, and screw the adjusting bolt to move adjusting
plate at the left position.
2) Put the belt on pulley and screw adjusting bolt to fasten the belt.
3) Fix the 4 pieces fastening bolt.
Installation of stopper
Installation of sensor
The sensor should be installed at the center of the door leaf.
The max installing height of sensor is 3m.
42 63
Opening your life
Figure 11
Figure 12
1 11
Publicidad
