Capitani Desiderio Plus Manual De Instrucciones página 30

Filling the boiler
Fill the bottle (21) with tap water (Fig. 6).
Open the water fill cap (9) by hand; turn the bottle upside
down with the top over the boiler hole and empty the contents
of the bottle into the boiler. When the tank is full, close the
cap (9) (Fig. 7)
When the water tank is empty, an acoustic alarm will inform
you that after 4 minutes steam will not be released any more.
You need to fill the tank with water
Do not fill the boiler with a detergent-based solution,
as this may lead to permanent boiler damage.
Filling the detergent tank.
Pour tap water or foam-free detergents into the detergent
tank after lifting the fill cap (15) (Fig. 8)
Filling the recovery tank
To provide more efficient suction, put 2.5 litres of water into
the recovery tank (2). This will ensure that the air is filtered
and any foreign material (dust, germs etc.) is trapped in the
tank.
To ensure smooth functioning of the appliance, do not exceed
the specified amount of water. (Fig. 9)
NOTE
Fig. 6
Fig. 7
Fig. 8
Fig. 9
28
21
9
2
15