Corsair ENTHUSIAST Serie Manual Del Usuario página 9

All manuals and user guides at all-guides.com
a. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable
directly to your motherboard.
b. If your motherboard has a four-pin socket, detach the four-pin from the
eight-pin cable, and then plug this four-pin cable directly to your
motherboard.
wARNINg: The detachable four-pin from the 24-pin main connector is not a "P4" or
"+12V" connector. Serious damage can be caused if you use it in place of a "P4" or
"+12V" connector.
5. Connect the peripheral cables, PCI-Express cables, and SATA cables.
a. Connect the peripherals cables to your hard drive and CD-ROM/DVD-ROM
power sockets.
b. Connect the SATA cables to your SATA SSD or hard drive's power sockets.
c. Connect the PCI-Express cables to the power sockets of your PCI-Express
video cards if required
d. Connect the peripheral cables to any peripherals requiring a small 4-pin
connector.
e. Make sure all the cables are tightly connected.
6. Connect the AC power cord to the power supply and turn it on by pushing the
switch to the ON position (marked with "I").
Congratulations! You have completed installation of your new Corsair Enthusiast
Series power supply and your system is ready to go!
Important Safety Information
Caution electric shock hazard!
1. Install in accordance with all manufacturer instructions and safety warnings.
Failure to do so may result in damage to your power supply or system, and
may cause serious injury or death.
2. High voltages are present in the power supply. Do not open the power supply
case or attempt to repair the power supply; there are no user-serviceable
components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or high
humidity environments.
5. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus that produce heat.
6. Do not insert any objects into the open ventilation or fan grill area of the
power supply.
7. Do not modify the cables and/or connectors included with this power supply.
8. If this power supply uses modular cables, use only manufacturer supplied
cables. Other cables might not be compatible and could cause serious
damage to your system and power supply.
ENTHUSIAST SERIES
9