DURAVIT L-Cube LC 7553 Instrucciones De Montaje Y Uso página 6

1 1
110 V
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
2
1
> Remove the mirror
fronts of the cabinet by
unlatching each hinge.
9
> Check the screws which
allow adjustments of the
unit.
> The top screw will adjust
front to back.
> The bottom screw will
adjust up and down.
> Make adjustment to the
level as needed.
2 2
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Plug the unit into outlet.
> Lift the unit up and onto the
mounting brackets.
10
4x
> Add four plastic caps.
3 3
4x S8
> The plastic anchors
provided are for concrete
wall applications.
7
5
> 7
> Make sure there is
clearance of minimum 3"
between mirror and the
washbasin.
11
16x
> Add eight supplied shelf
brackets.
4 4
4x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
8
> Check the cabinet is
leveled and securely
attachted to the wall.
12
> Add shelving to unit.
MAL_L-Cube_LC7553/19.09.3
6