3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
The check for the absence of damage and the completeness of the device must be carried out upon receipt
of the package. In the event of identification of damage due to transport, refuse or accept the delivered
product only with reservations *. A complaint detailing the defects observed must then be made. The
perception of damage is only possible in the event of a complaint formulated within the prescribed time limits,
ie 24-48 hours at most.
* written on the carrier's delivery papers or digital.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
Temperature
Supply voltage
Dimensions
Weight
Accessories
The refrigerated display case is equipped with a compressor. R600a or R134a refrigerant gas is an
environmentally friendly gas.
It has a refrigeration system with a forced air cooling fan.
The showcase is equipped with double transparent glasses. It has an elegant aesthetic appearance,
perfect perspective and easy access.
It can be used in shops, small businesses or meeting rooms.
CVR125L
2-12 ° C
220V / 50Hz
W 710 x D 568 x H 686 mm
55 Kg
2 grid shelves
ES