Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Wipe the appliance housing with a cloth lightly moistened with water and
then dry it carefully.
4.
When the appliance is completely dry inside and out, insert the plug into a
suitable power socket (220 - 240 V~ 50/60Hz).
5.
Now switch the appliance on, without the accessories and without
foodstuffs. Leave the appliance door completely open.
6.
Select the setting 230° C with the temperature control switch. Place the
main function switch to upper and lower heat.
7.
Place the timer switch at 15 minutes.
The appliance allows itself to be switched on with the timer switch. As
soon as the time switch is set the control lamp glows.
As the heating elements are lightly greased, a slight smell may occur
when first putting them into operation. This is harmless and stops after
a short time. Open a window and provide for sufficient ventilation.
8.
When the appliance has switched itself off automatically, remove the plug
from the power socket and wait until the appliance has cooled itself down.
9.
Then clean the grill and baking area with a cloth lightly moistened with
water and then dry it carefully.
Switching off and transportation
Switching off
Set the main function switch and the timer switch to OFF position. Unplug
•
the power plug from the socket.
Transporting
If you wish to transport the oven to a different location, first allow it to cool
•
down.
Remove the power cord from the socket.
•
Wind the power cord around the bracing hooks at the back of the
•
appliance.
Operation
Grilling and baking
1. Remove the wire rack and bake tray from the appliance. If required, cover
these with baking paper resp. smear the baking tray with butter or oil.
Instructions Manual
English
5
Publicidad
