Worx WX638.1 Manual Original página 13

PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLuE =NEuTRAL
BROwN =LIVE
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected to
the terminal which is marked with N. The wire
which is colored brown must be connected to
the terminal which is marked with L.
wARNINg!Never connect live or neutral
wires to the earth terminal of the plug.
Only fit an approved 13ABS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Finishing sander
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description wORx Finishing sander
Type wx638 wx638.1 wx640 wx640.1
(635-644-designation of machinery,
representative of Finishing sander)
Function Removing surface material
using an abrasive medium
Complies with the following directives:
Machinery Directive
2006/42/Ec
Electromagnetic Compatibility Directive
2004/108/Ec
RoHS Directive
Standards conform to:
EN 55014-1
EN 61000-3-3
EN 55014-2
EN 60745-1
EN 61000-3-2
EN 60745-2-4
The person authorized to compile the
technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds,LS10 9DS,uK
2013/01/29
Leo Yue
POSITEC Quality Manager
2011/65/Eu
13
EN