Beamz MHL820 Manual De Instrucciones página 6

TILT - Tilt Inversion
1. Press the MENU button until "TILT" is displayed, press ENTER. Either "Yes" or "No"
will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons until "Yes" is displayed,
press ENTER to confirm. To deactivate tilt inversion, select "No" and press Enter
LED - With this function you can have the LED display turn off after 10
seconds.
1. Press the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select
"ON" to keep the LED display on at all times, or "OFF" to switch to have the LED display
switch off after 10 seconds.
DISP - This function will reverse the display 180º.
1. Press the MENU button until "DISP" is displayed, press ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it again.
3. To make you LED display reappear again press any button
TEST - This function will run a self-test program.
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self-test.
FHRS - With this function you can display the running time of the unit.
1. Press the MENU button until "FHRS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU to exit.
VER - Use this function to display the Software version of the unit.
1. Press the either the MENU button until "VER" is displayed, press ENTER.
2. The display will show the software version.
RSET - This function will reset the unit.
1. Press the MENU button until "RSET" is displayed. Press the ENTER button and the unit will reset itself.
OFFSET SUBMENU
Menu
To enter the Offset Menu, press the ENTER button for at least 3 seconds. In this submenu you are able to adjust the home
positions of the tilt motor positions.
Tilt Offset - Adjustment of the tilt home position for any of the 2 bars.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that either "Til 1" or "Til 2" is
displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU button for
one second to exit.
6
ENTER
MODE
UP
DOWN
ENTER
MODE
UP
DOWN
ENTER
MODE
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN