Bimar QH-TV20 Folleto De Instrucciones página 13

- the appliance is away from other sources of heat, flammable materials (curtains,
upholstery, etc.), flammable gases or explosive materials (spray cans) and materials that
can be deformed by heat.

This appliance must not be used in any type of vehicle or restricted space (lifts,
camper vans, cars, cabins etc.).

Attach the wall heater using the 4 screws provided, using the holes found on the
back of the casing. Ensure that the appliance is disconnected from the plug point
before attaching it.

Ensure that the power cable is correctly positioned and does not come into contact
with hot parts or sharp edges, or become wound around the device itself and is not
twisted.
USING THE APPLIANCE
The heater is equipped with a "pull switch", to select the
power output of the heater.
Adjust the angle of the heating part to direct the infra-
red light and heat.
To turn off the heater, pull the "pull switch" and remove
the plug from the plug point.
If the appliance is not being used for long periods of time,
remove the plug from the plug point.
13