KTM APEX PRO 7117 Instrucciones De Montaje página 20

5 ASSEMBLY
5.1
8
Assembly
501279-01
501280-01
501281-01
501282-01
501288-01
–
2
Remove screws .
–
3
Remove screw .
–
Remove the steering damper.
–
Position steering damper
–
Mount and tighten original screws
Guideline
Screw, steering M6
damper bracket
on frame
–
Mount and tighten original screw
Guideline
Screw, steering M8
damper on triple
clamp
–
Adjustment range: 0 - 31 clicks.
–
To increase the damping, turn adjusting wheel
ring damper clockwise. Maximum damping: 31 clicks.
–
To reduce the damping, turn adjusting wheel
ring damper anti-clockwise. No damping: 0 clicks.
Info
The steering damper must not come into contact with
other components across the entire steering angle.
1
(included).
2
.
8 Nm (5.9 lbf ft)
Loctite
3
.
8 Nm (5.9 lbf ft)
Loctite
8
of the stee-
8
of the stee-
® 243™
® 243™