RiverRidge ASHLAND TALL CABINET 06-082 Instrucciones De Montaje página 10

STEP 11
STEP 11
1. Attach 1 metal bracket (P) to back of cabinet by inserting 1 screw (Q) through hole on metal bracket
(P) then tighten to back of cabinet.
2. Use the position of the metal bracket (P) on cabinet to determine position of second metal bracket (P)
on wall. Drill hole in wall where second metal bracket (P) will be placed.
3. Insert one plastic anchor (R) into hole on the wall, then attach second metal bracket (P) to the plastic
anchor (R) by inserting 1 screw (S) though hole on metal bracket (P) then tighten to plastic anchor
(R).
STEP 12
STEP 12
1. Place the cabinet against the wall.
2. Insert 1 plastic lock strip (T) through metal bracket (P) on the cabinet then through metal bracket (P)
on wall, fasten plastic lock strip (T) to fix 2 metal brackets together firmly.