Descargar Imprimir esta página

Orbegozo HO 232 A Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

HO 232 A
 Do not touch the hot parts of the device. Use an oven
cloth if necessary.
 The rear of the appliance should be against the wall.
ATTENTION: do not cover the appliance when it is
operating to avoid the risk of fires.
ATTENTION: This symbol show: Hot surface.
CAUTION: The surface can remain hot during or
after use.
INSTALLATION
• After removing the packing materials, check the integrity of the appliance; if you are unsure, do not
use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam,
nails, etc.) must be kept out the reach of children because they are potential sources of danger;
dispose of them according to current regulations, in dedicated containers for differentiated collection.
Attention: any stickers or advertising material applied to the door must be removed before using the
appliance. The manufacturer declines all responsibility in case this is not safe working practices will be
respected.
• Before connecting the appliance, check that the voltage shown on the data plate matches that of
your power supply and that the electric plug is grounded. In the event of incompatibility between the
electric outlet and the plug of the appliance, have the outlet replaced with another more suitable type
by professionally qualified personnel, who will make sure that the section of the wires of the outlet is
appropriate for the absorbed power of the appliance. In general, the use of adapters or extension
cords is not recommended; if their use is indispensable, they must conform to existing safety standards
and their current capacity (amperes) must not be less than the maximum of the appliance.
• The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
• Each time before use, check that the appliance is in good condition and that the electric cord is not
damaged: if in doubt, ask for professionally qualified help.
• Make sure that the cable is correctly positioned, that it is not touching hot elements or sharp edges,
is not wound around the utensil, is not twisted up on itself or in the way, so the appliance cannot tip
over.
15

Publicidad

loading