Programmed Play; Technical Data; Meaning Of The "Dustbin" Symbol - AEG CDP 4212 Instrucciones De Servicio

English
36
Press a sixth time = all the functions are reset.
The normal play mode is resumed.

Programmed Play

1. Press the STOP key (3).
2. Press the PROG key (10).
3. PROG and „Cd 00" (track number) fl ashes on the
display. Next to it you can see the memory preset
number P-01.
4. In MP3 mode the number of the folder is shown at
the top and the track number below it. Next to it you
can see the memory preset number P-01.
5. Use the I SKIP+/I
select the desired track and then press the PROG
button again.
NOTE:
Press the ESP/DIR button to select the desired
folder in MP3 mode.
6. The display changes to memory slot 02.
7. Select the next track with the
and press the PROG key again. Repeat the procedure
until all the desired tracks are selected. Press the
PLAY/PAUSE key (2). The playback starts. Press this
button to pause briefl y the playback.
8. Press once the STOP key to stop the playback while
retaining the program.
9. To resume the playback of the program press fi rst the
PROG key once and then the
10. To delete the program, press the
(The machine switches off ).
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
sequence remains in the memory until the CD is taken
out of the CD deck or until the device is switched off .
It is possible to combine the pre-programmed tracks with
the MODE function. After you have programmed the
tracks and started the machine, please press the MODE
button up to fourth times so that the functions „
„ ALL" and „INTRO" can be used as described in the
section entitled „MODE".
MP3 CDs
This machine of is able to play MP3 CDs. Up to 200
tracks can be compressed and stored on these CDs. Your
machine detects an MP3 CD automatically (the word
MP3 appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs".
Tracks can be programmed as described under „Playing
Back Programmed Tracks".
05-CDP 4212.indd 36
05-CDP 4212.indd
SKIP- buttons (13/14) to
I SKIP+/I SKIP-
II
II PLAY/PAUSE key.
STOP key twice
",

Technical Data

Model: ............................................................. CDP 4212 CD/MP3
Headphone socket:.............................3.5 mm stereo jack plug
LINE OUT socket: .................................3.5 mm stereo jack plug
Mains adapter: .............. 4,5 V DC, 600 mA, polarity
Battery operation: .................................. 2 x 1,5 V, Type R6, AA
Net weight: .............................................................................. 0,2 kg
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no
longer use to the collection points provided for their
disposal.
This helps avoid the potential eff ects of incorrect dispo-
sal on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
03.04.2008 14:03:53 Uhr 03.04.2008 14:03:53 Uhr