Velleman CCTVPROMT1 Guía Rápida página 18

13. Push Status
Note: Before using this function, make sure that you have configured EagleEyes* and that the Guard has been
enabled. For details, please refer to chapter 12. Setting Up Push Video.
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
MULTICASTING
EXIT
1. Set ACTION to ON.
2. Select the system event(s) you want to get notified via your mobile device.
3. Activate the push status of the device in the EagleEyes application. Go to CONFIGURATION – OPTIONAL –
PUSH STATUS.
Set Flow Counting – Virtual Fence – One-Way Pass
14.
Note: Before using the IVS function, make sure that event recording is enabled on your DVR.
Intelligent Video Surveillance (IVS) is the advanced application for motion detection, but more precise and
smarter. It can be applied to different situations with one of the following three modes: FLOW COUNTING,
VIRTUAL FENCE or ONE WAY.
On the DVR, right-click to show the main menu, and select
V. 01 – 25/02/2016
CCTVPROMT1
ADVANCED CONFIG
PUSH VIDEO PUSH STATUS
ACTION ON

EVENT








MESSAGE MAIL VIDEO MAIL
ALL
VIDEO LOSS
HDD FULL
POWER ON
HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NET LOGIN
KEY UNLOCK
UPS
SYSTEM ABNORMAL
(ADVANCED CONFIG) > IVS.
18
VIDEO FTP
©Velleman nv