All manuals and user guides at all-guides.com
After steam cleaning
Immediately after steam cleaning
4
After steam cleaning
illustrated Quick Start Guide (Page 3).
Cleaning the appliance
–
Before cleaning, switch off the appliance and disconnect the plug from the outlet.
–
The housing and power cable may not be handled with liquids or immersed in liquids for reasons
of electrical safety. Rub housing with a slightly damp cloth and then dry.
–
For cleaning, do not use any sharp or scouring cleansers or hard brushes.
Troubleshooting by yourself
To avoid problems it is important to use the appliance in accordance with this instruction manual.
If you still have problems with the appliance, first visit us on the Internet at
www.severin.com/go/to/8366 under "FAQs" and try to fix the problem by
yourself.
Use this QR code to reach our home page directly. If this does not help,
contact our customer service. The contact data is in the appendix to this
instruction manual or on our home page.
1. Switch the appliance off as shown. The LED goes off.
2. Pull plug from outlet.
3. Wrap cable (Quick Start Guide, page 4).
4. Wait at least 5 minutes until the cleaning cloth is cooled
down.
5. Remove cleaning cloth. Allow cleaning cloth to dry or
wash at max. 60 °C. Do not use fabric softener. Do not
bleach. Do not put in dryer.
17