Division:
Operating temperature:
Display for weak battery
Overload indicator
Error indicator
Battery operation:
Description of the appliance
q
Display
w
Selector switch (kg / lb)
e
Safety glass
r
Battery compartment
Intended Use
This digital glass scale is intended exclusively for use
• as a personal weighing scale
• in a domestic environment.
Items supplied
Digital glass scale
1 x CR2032 / 3V lithium battery
Operating instructions
Before using the appliance for the first time, check to
ensure that the items are complete and undamaged.
0.1 kg / 0.2 lb
10°C–40°C
1 x CR2032 / 3V
(Lithium Batteries)
Taking the scale into use
1. Open the battery compartment
cover in the direction of the arrow and then
removing it. Remove the insulation tape from the
battery compartment
into the battery compartment
observe the correct polarity.
2. Slide the cover back on to the battery com-
r
partment
until it firmly engages.
3. Set the desired unit of weight (kg or lb) by
pressing the selector switch
• Place the scale on a flat and firm surface.
Ensure that neither the floor at the location of the
scale nor the upper surface of the scale are wet,
otherwise there is a risk of slipping!
Notice!
This glass scale contains sensitive electronic components
and it should therefore NOT be located:
• close to sources of heat
• in environments with extreme air humidity.
Weighing
Important:
NEVER burden the scale one-sidedly. ALWAYS step
onto the scale in the middle and with both feet.
Otherwise, the scale could tip and become irreparably
damaged. Additionally, there is the risk of falling over!
- 21 -
r
by sliding the
r
and then insert the battery
r
, taking care to
w
.