Publicidad
Idiomas disponibles
Idiomas disponibles
BAR LIGHT - WWBL5
Installation
The Bar Light is a linear light designed to wash
walls, falls and spillways with a wide beam angle.
Solid brass Bar Light includes dual bases for
positioning on any horizontal surface. For other
applications, included stainless steel L-brackets
may be used to mount Light to any hard surface.
Mount the brackets to the light and measure
between the holes, center to center. Detach the
brackets from the light. Mark where the light is to
be mounted and attach the brackets to
the mounting surface using an appropriate
fastener. Mount the light to the brackets. The
mounted Light rotates 30° in either direction
for versatility in directing illumination.
FOUNTAIN LIGHT - WWFL2
Installation
Atlantic's epoxy encased Fountain Light illuminates water inside
vases, basalts and bubbling boulders. The PVC body with bottom
mounted cord fits inside 11/ 2 " socket fittings and 2" bore holes.
Glue the 3/ 4 " slip x 3/ 4 " barbed fitting, included, to attach 3/ 4 "
Kink-Free tubing directly to Fountain Light. Without the fitting,
the light mounts directly onto 3/ 4 " rigid Sch40 PVC.
WIRING KIT - WW30X4
All Warm White lights and wiring components connect via a 2 wire quick-connect plug that
is gasketed for outdoor use. Quick-connect plugs are not waterproof and should not be
submersed. Use included dielectric grease on all connections.
The WW30X4 Wiring Kit connects up to four Warm White lights (any models) to a single 30
watt transformer. The transformer must be plugged into a properly grounded GFCI outlet.
Please follow the connection diagram below for proper installation.
LIGHT #2
LIGHT #1
LIGHT #3
LIGHT #4
WWBSX4
Weatherproof
30 Watt
4-outlet Block Splitter
removable caps
Transformer
5
Publicidad
