OCELOT GAMING OM- C27 Manual De Instrucciones página 3

INSTALATION
Instalation
As show ①, placing a protective film or soft cloth on a flat table. Avoid any hard object
such as screws on the table.
Then place the LED monitor on the flat table like shown pic. ② below
As shown ③, fixing the support bracket using the screw given, then tighten with a
screwdriver
As shown ④, fixing the base at the installed support bracket with screw and tighten with a
screwdriver. Then finally, lift the LED monitor from the foam by holding at the support
bracket and place it on the table.
Connect the displayport or HDMI cable from your computer to the corresponding port on
the back of your monitor.
Connect the power cord to the monitor, press the power button.
When the monitor is operating under normal conditions, the LED indicator light will be
green or blue; if the monitor is in economy mode, the LED indicator light will be red.
When the LED indicator is off it means the monitor is in off mode.
Unplug the power cord when not using the monitor.
2
1
4
3