System Build 8129408COM Instrucciones De Montaje página 22

STEP 14
Insert the barrel of the lock (17a) into the hole as shown.
With the teeth of the lock nut (17c) facing the door
surface, tighten the lock nut (17c). Position lock bar (17b)
and attached the barrel of the lock (17a) with the lock
screw (17d). Lock bar (17b) will point straight left. When
you turn the lock with the key, lock bar will rotate
couter-clockwise pointing straight down (unlock position).
17d
17c
17b
17c
systembuild.com
17b
17a
17c
Flat /smooth
surface of
Keyway Vertical
lock barrel.
Teeth of lock nut will tighten
against the surface of the door.
17d
17e
17a
22
You
Tube