Publicidad
Idiomas disponibles
Idiomas disponibles
WF 0145
Assemble the Front Cover (1)
- Attach the circumference of the front cover (1) inside the other channel of the covering ring.
- Finally tight and secure the screw of the covering ring.
INDICATIONS
- This fan can tilt upwards and downwards by turning and let loose the joint knob (7). It is important to re-
secure this knob after you adjust the settings.
- To operate the fan and increase the speed, use the right handle
- To turn it off and / or decrease the speed use the left handle
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most efficient operation. Unplug the fan,
•
then reserve the assembly procedure to remove those parts from the motor assembly before cleaning.
Wipe with a damp cloth then towel dry.
Never immerse any fan components in water. Wipe the fan only with a dry or slightly moist cloth, then
•
immediately towel dry.
Always sotre the fan in a cool dry location.
•
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2006/95/EC and the
requirements of the EMC directive 2004/108/EC.
10
Publicidad
