Energy Saving; Hints And Tips - PURE SIROCCO 150 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73

Energy saving

Sirocco 150 is part of the PURE EcoPlus product family and has an energy-saving standby
mode.
In energy-saving standby mode, the screen and clock will be switched off and any iPod or
iPhone in the dock will not be charged. The standby indicator light will be lit to show that the
unit is in standby, and power consumption will be greatly reduced.
In standby mode, the screen is illuminated and the time is shown. Any iPod or iPhone that is
docked will be charged
To switch energy saving on or off, press Menu then rotate the tune dial and select 'Energy
Saving', then 'On' or 'Off'.
Menu
Please note: When entering energy saving standby, there is a short delay while Sirocco 150 shuts
down. 'Powering off' will be shown on screen during this time.

Hints and Tips

(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but are not currently
available. Inactive stations have a '?' before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous station.
Screen shows 'No stations available'
Check that your aerial is fully extended. Use Autotune to search for stations. Try adjusting your
aerial or radio position.
Clock hasn't adjusted for summer/winter daylight saving
Switch the unit on to DAB to acquire the time from the DAB signal – there may be a delay in
broadcasters updating the time signal.
Resetting your radio
Resetting your radio removes all presets, stored stations and favourite station settings and resets
all options to defaults. To reset:
1.
Press and hold the Menu button for three seconds
2.
Press the navigation dial to confirm the reset.
12
EcoPlus

Publicidad

Tabla de contenido
loading

Tabla de contenido