Publicidad
Idiomas disponibles
Idiomas disponibles
1. Assemble the connecting bar A
bar C
5
to the side frames
Fig. B).
2. Attach the cross bars
four short screws (M6 × 12 mm)
3. Turn both table top
ground.
Put the assembled structure on top of the table top and secure them with
six medium screws (M6 × 30 mm)
Screw the feet
adjust the feet for your desired height.
The product is now assembled (see Fig. E).
Cleaning
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like.
They could damage the surfaces.
1. Clean the product with a damp cloth and a mild soapy solution if necessary.
2. Wipe the product off with a dry, lint-free cloth.
2
6
to the assembled structure and secure them with
1
and the assembled structure upside down on the
into the legs of the frames (see step 2 in Fig. D). You can
10
3
, connecting bar B
with six long screws (M6 × 40 mm)
9
(see Fig. C).
8
(see step 1 in Fig. D).
Cleaning
4
and connecting
7
(see
11
Publicidad
