WARNING: Never put the heating element, control box and the plug into water.
WARNING: Charcoal or similar combustible fuels must not be used with this appliance.
WARNING: Silver paper must not be used with this appliance.
WARNING: In order to avoid overheating, this appliance shall not be covered by any solid
or flexible material such as an aluminum tray, aluminum foil or trays made of other heat
resistant material. The use of such items or materials on the grille would impair the safe-
ty of your product and could lead to serious damage.
2. HOW TO USE
BEFORE USING FOR THE FIRST TIME
1. Remove any packaging materials from the appliance.
2. Clean the grill rack and its accessories.
3. When switched on for the first time, the grill may emit a smell. A small amount of
smoke may also be noticeable. This is normal. We therefore recommend you to
heat up the barbecue for about 5 minutes without any food.
UPPER PART ASSEMBLING
4. Fasten the 4 pieces of plastic foot (3) on the back side of the body (1).
5. Fill the body with water up to the "1 L" marking.
6. Barbecue assembly:
1) Insert the straight metal pipe (6) through the two holes of zinc plate (4) and
body on the two sides.
2) Use M4 nuts (5) to fasten the zinc plate in the front holes of the body (next to
the electric junction box) by the longest screw fixed.
7. Place the two rubber sockets (7) onto the left and right sides of the straight metal
pipe to avoid overheat (A).
8. Insert the heating element (8) above the zinc plate and guarantee its bottom hole
is connected with the metal hook (B).
9. Fix the grill rack (9) on the top.
1. Body 2.metal hook 3. Plastic foot 4. Zinc plate 5.M4 nut
6. Straight metal pipe 7. Rubber sockets 8. Heating element 9. Grill rack