Descargar Imprimir esta página

Magic Chef HMWC44DZ Manual Del Usuario página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING GUIDE
You can solve many common appliance problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the problem
before calling for service.
PROBLEM
The appliance does not
operate.
The temperature inside
the appliance is too
warm.
The temperature inside
the appliance is too cold.
The unit vibrates.
Moisture forms on the
interior appliance walls.
Moisture forms on the
outside of the appliance.
The door will not close
properly.
 The appliance is not plugged in.
 The circuit breaker tripped or a fuse blew.
 The temperature control is set too warm. Turn the control
to a cooler setting and allow several hours for the
temperature to stabilize.
 The door is kept open too long or is opened too
frequently. Warm air enters the appliance every time the
door is opened. Open the door less often.
 The door is not closed completely.
 The door gasket does not seal properly.
 The appliance has recently been disconnected for a period
of time. It takes 4 hours for the appliance to cool down
completely.
 The temperature control is set too cold. Turn the control
to a warmer setting and allow several hours for the
temperature to stabilize.
 Check to assure that the appliance is on a level surface.
 The appliance is touching the wall. Re-level the appliance
and move it away from the wall. If continued vibrations
occurs, turn off the appliance and unplug the power cord.
Contact the Customer Service Department for further
assistance.
 The door is slightly open.
 The door is kept open too long, or is opened too
frequently. Open the door less often.
 The door is not sealed properly.
 The door is slightly open, causing cold air from inside the
appliance to meet warm moist air from outside.
 The appliance is not on a level surface.
 The gasket is dirty.
ENG - 14
POSSIBLE CAUSE
14

Publicidad

loading