Publicidad
Power supply for electronic devices
» The Powerstation is compatible with devices that require alternating current
(AC) or direct current (DC).
» There are several ways to supply power to electronic devices.
» AC/DC outputs can be used simultaneously.
Use of the AC 230V outputs:
You can use the power station to supply devices with a rated power of up to
600W.
1. Then press the ON/OFF button for output AC.
2. Connect the AC plug of your appliance to the AC output of the power station.
Notes:
» Make sure the AC power plug is properly plugged into the AC output of the
power station.
Using the USB-A outputs:
1. Press the ON/OFF button for outputs USB-A.
2. Connect the USB cable to the terminal device and insert the USB-A plug into
one of the USB-A outputs.
Notice:
» The USB-A outlets provide a power of 5V 2.4A.
Use output USB-C PD:
» Use a USB-C cable with PD functionality to charge devices at full power.
» The Powerstation features USB Smart Charge technology, which allows the
Powerstation to communicate with connected devices to provide the fastest
and safest charging option.
» The USB ON/OFF button does not apply to USB-C.
1. Connect the USB-C PD cable to the end device and insert the USB-C plug
into the USB-C PD output.
11
Publicidad
