Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
The rated power: 220-240 ~
Frequency : 50 Hz
Maximum Power: 45W
Timer : 120 Minutes
Insulate class: II
PLEASE READ THE INSTRUCTIONS CAREFULLY OF THIS MANUAL BEFORE STARTING.
DO NOT HANDLE THE FAN INTERNALLY.
The texts, photos, colors, figures and data correspond to the current technical level from the moment
they were printed. We reserve the right to modifications motivated by the permanent development
of the technique in our products.
FAN PARTS
EN
1.
Speed selector
2.
Rotating grid
3.
Timer
4.
Blades
5.
Front case
6.
Motor
7.
Rotating grid
8.
Legs
9.
Connection cable
10.
Back box
11.
Rear grill
GRILLE CONTROL
With this switch you can start or stop the movement of the grid swivel front
In the ON position this tour.
In the OFF position it is stopped.
OPERATION
A.- Connect the network cable to a socket (230V AC, 50 Hz) of your home, using the network cable.
B.- Using the speed selector (6) select the one you want for an air flow, according to the following
positions: "1" Low speed, "2" Medium speed, "3" High speed, and place the button in the "0" position
whenever I stop.
This fan can be operated for a few minutes previously selected with the timer (3). You can adjust the
6
Through this switch the fan will start, and in the different positions will get
different air flow rates.
Position 1 Low speed
Position 2 Average speed
Position 3 High Speed
Position 0 Stopped
With this command you can select a few minutes for the fan to work, when it
reaches the end of the time you have selected the fan automatically stops and
remains in the "OFF" position.
VERY IMPORTANT:
For the fan to return to normal operation, without using the timer, you must
set this control in the "ON" position
In "OFF" position the fan does not work with the speed selector knob.
Publicidad
