MO-EL SWAN 7200W Uso E Manutenzione página 8

4.Insert the plastic plugs in the holes you just made and fix the wall
support with screws.
5.Reassemble the front cover of the wall support and tighten the screw
on the bottom.
6.Connect the socket to the general current.
FUNCTIONING
1.Remove the hair dryer from its housing by taking it by its handle.
2.Select the temperature with the control on the rear of the handle (E):
"2" for warm, "1" for warm, "C" for cold.
3.Press the button (D) on the front of the handle to command the air to
escape; the hot air flow is generated until the pressure on the but-
ton is maintained.
8