probst VTK-V Instrucciones De Uso página 41

Maintenance and care
6.2 Trouble shooting
ERROR
The clamping force is insufficient,
the load is slipping out
(optional)
(optional)
Adjustment of the gripping range
(optional)
Property of material
6.3 Repairs
Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
51100015
CAUSE
The grippers are worn
The maximum load is exceeded
The actual opening width is not
correct
The surface of the material is dirty or
the material is not suitable / allowed
for this device
16 / 17
REPAIR
Replace the grippers
Reduce the weight of the load
Adjust the gripping range according
to the load you want to transport
Check the surface of the material or
ask the manufacturer, if the material
is allowed for this device
GB