Publicidad
Idiomas disponibles
Idiomas disponibles
IV. Pairing your sound system with a Bluetooth®
-compatible device
1. First, turn on the soundbar using the power button on the remote control.
2. Place the soundbar and your Bluetooth
meter away from each other.
3. Enable the Bluetooth
function on your device and set it to discover the
®
soundbar.
4. Press the Mode button on the soundbar or on the remote control until you
reach Bluetooth
mode. The BT icon will start blinking fast to indicate that the
®
system has entered into pairing mode.
5. Once the speaker appears listed under the newly found Bluetooth
(KSB-230), it will ask if you want to pair your mobile device with it.
6. Accept by pressing Yes or Ok. If you have a lower Bluetooth
be prompted to enter the pass key "0000" (4 zeros).
7. When pairing is successful, another short beep will be heard, making the LED
light blink slowly before it becomes solid.
8. If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
-enabled device not more than one
®
devices
®
version, you may
®
V. Technical speci cations
MPN
Device
2.1 Sound bar
Type
160W
Reference RMS rated
<0.5W
Standby
100V-240V AC, 50Hz-60Hz (autosensing)
AC input
• Power/Mode • Play/Pause • Volume + • Volume -
Buttons in soundbar
• Power • Mode • Mute • Volume+ • Volume- • Previous
Buttons in remote control
track • Next track • Play/pause • Music • Movie • Bass •
News • Game • LED o
Soundbar
Driver unit
4 x 2-inch mid-high frequency drivers
Frequency
60Hz-16kHz
Impedance
8
Sensitivity
93dB
Signal to noise ratio
≥75dB
Subwoofer
Driver unit
5.25"
Frequency
120Hz -130Hz
Impedance
4
Connectivity
Connection type
Bluetooth® v5.0 compatible and wired
Audio input ports
HDMI ARC, Aux 3.5 mm, USB, digital optical
Wireless frequency
2.4-2.48 GHz
Wireless range
33 ft
KSB-230
1
Publicidad
